Weight Distribution Spring Bar (Pair)

This pair of weight distribution spring bars is rated 1,000 lbs tongue weight, 28" long, and 7/8" diameter. Sold as a matched pair for a complete WD setup. Each bar works with your weight distribution hitch head to transfer tongue weight to the front axle, leveling the ride and improving stability when towing a travel trailer or RV. Spring-steel construction with a black powder-coat finish resists rust. Replacement bars for existing WD systems.

Advantages

Distributes Tongue Weight — Levels the vehicle and transfers load to the front axle.
Improves Stability — Reduces sway and improves braking control.
Restores Factory Ride — Eliminates rear-end sag with heavy trailers.
Complete Pair — Ready to install on both sides.
Durable Finish — Resists rust and corrosion.

FAQ

Q: Does this include everything for a full WD setup?

A: No. These are the spring bars only — the two tension bars that transfer weight. You will need the WD hitch head and any brackets/levers from your existing system or a separate kit.

Q: Why sold as a pair?

A: Weight distribution hitches require one spring bar on each side of the trailer tongue. The pair gives you both bars for a complete, balanced setup.

Q: Will it fit my WD hitch head?

A: This 7/8" bar with slot mounting fits most standard weight distribution hitch heads. Verify your head's bar slot and diameter before ordering.

Q: How does it work?

A: Each bar fits into the WD head and applies leverage that transfers tongue weight to the front axle, leveling the vehicle and trailer.

Q: Does it reduce sway?

A: Yes. Proper WD setup improves stability and, combined with a sway control, reduces trailer sway.

Q: What trailers is it for?

A: Matched to ~1,000 lbs tongue weight — for larger travel trailers, RVs, and heavy utility trailers. Confirm your trailer's tongue weight is within range.

Specifications & SKU

What's in the Box

2 x Weight Distribution Spring Bars (1,000 lbs TW, 28", 7/8")

Disclaimer

Do not exceed 1,000 lbs tongue weight rating.
Use both bars as a matched pair.
Verify bar diameter (7/8") and head size match your WD hitch head.
Follow your WD hitch manufacturer's setup and torque instructions.
Inspect bars for bends or cracks before each trip. Replace if damaged.
Manufacturer not liable for damage or injury from misuse.